Canon iPR C7010VP Series, Installation Manual

Page: 78 / 157

Chapter 2
2-33
F-2-130
3) Remove the paper surface link [1] from the paper surface sensor flag [2].
4) Set up the paper surface detection arm [3] to remove it upward.
F-2-131
5) Lift the Deck Pickup Unit, and remove the Attraction Duct [1].
- 4 Screws [2]
- 1 Bearing [3]
F-2-132
CAUTION:
Remove the screws while supporting the suction duct. If not supported, the
suction duct may drop down to be broken.
[1] [2] [3] [4]
[1]
[2]
[3]
CAUTION: Point to note when attaching
Fit the bearing [2] of the belt drive roller [1] into the hole [3] of the frame
and fit the 2 bosses [4] of the suction duct to fix.
[1]
[2]
[3]
[4]
[4]