Canon iPR C7010VP Series, Installation Manual

Page: 124 / 157

Chapter 2
2-79
2) Remove the following parts.
- 1 connector [1]
- 1 screw [2]
- 1 screw [3]
- 1 positioning pin [4]
F-2-330
3) Open the internal delivery unit [1] and detach it, and then detach the har-
ness guide [2] from the gap [A] of the end plate.
F-2-331
4) While pushing the button [1], tilt the lever (C-B4) [2].
5) Remove the 2 screws [3] and detach the lever (C-B4) [2].
F-2-332
6) While opening the lever (C-B5) [1] a little, detach the primary fixing low-
er front cover [2].
- 1 screw [3]
F-2-333
7) Remove the stepped screw [1] and the screw [2].
F-2-334
8) Hold the 2 grips [1] and remove the secondary fixing assembly [2].
F-2-335
[1]
[2]
[3]
[4]
[A]
[1]
[2]
[1]
[2]
[3]
CAUTION: Points to Note At Attachment
Fit the 2 pins [1] at the rear side of the secondary fixing assembly to the 2
holes [2] of the fixing assembly mount, and perform attachment.
[1]
[3] [2]
[1]
[2]
[1]
[2]