Canon imageRUNNER ADVANCE C350 series, Service Manual

Page: 733 / 1173

7
7
7-119
7-119
Error•Jam•Alarm > Error Code > Error Code Details
Error•Jam•Alarm > Error Code > Error Code Details
Error
code Detail
Code
Location Item Description
E720 0100 05 Title Cassette Pedestal detection error
Detection
description
Connection of the Cassette Pedestal could not be detected.
Remedy [Related parts]
- Cassette Pedestal
- Harness between the DC Controller PCB (UN04/J190) and
the drawer connector (J5904) on the host machine side (Unit of
replacement: OPTION CST. DRAWER ASSEMBLY)
- Harness between the drawer connector (J5950) on the
Cassette Pedestal side and the Cassette Module Controller
PCB (UN101/J650) (Unit of replacement: DRAWER CABLE
ASSEMBLY)
- Drawer on the host machine side (Unit of replacement:
OPTION CST. DRAWER ASSEMBLY)
- Drawer on the Cassette Pedestal side (Unit of replacement:
DRAWER CABLE ASSEMBLY)
- Cassette Module Controller PCB (UN101) (Unit of
replacement: CST. PEDESTAL CONT. PCB ASS’Y)
- DC Controller PCB (UN04) (Unit of replacement: DC
CONTROLLER PCB ASSEMBLY)
[Points to note at work] When checking the harness/cable or
connector, perform the following work.
1. Disconnect and then connect the connector to check that
there is no bent pin and cable disconnection.
2. Visually check that the harness is not caught or open circuit.
3. If there is any error, replace the corresponding harness/cable.
[Remedy] Check/replace the related parts.
E730 A006 00 Title PDL communication error
Detection
description
Response from PDL could not be detected.
Remedy [Related parts] Main Controller PCB (UN81) (Unit of
replacement: MAIN CONTROLLER PCB ASSEMBLY)
[Remedy] Perform the following in the order while checking
whether the error is cleared.
1. Select “Settings/Registration> Function Settings> Printer>
Printer Settings> Utility> Initialize Printer”, and execute PDL
reset processing.
2. Turn OFF and then ON the main power, and check whether
the error is cleared.
3. Reinstall the system software.
4. Replace the Main Controller PCB.
Error
code Detail
Code
Location Item Description
E730 A007 00 Title Mismatch of PDL version
Detection
description
Version of the host machine control software and version of
PDL control software were different.
Remedy [Related parts]
- Flash PCB (UN96)
- Main Controller PCB (UN81) (Unit of replacement: MAIN
CONTROLLER PCB ASSEMBLY)
[Remedy] Perform the following in the order while checking
whether the error is cleared.
1. After deleting the system software using USB memory,
reinstall it using SST or a USB memory.
2. After replacing the Flash PCB, reinstall the system software
using SST or a USB memory.
3. Replace the Main Controller PCB.
E730 B013 00 Title PDL embedded font error
Detection
description
Font data was corrupted.
Remedy [Related parts]
- Flash PCB (UN96)
- Main Controller PCB (UN81) (Unit of replacement: MAIN
CONTROLLER PCB ASSEMBLY)
[Remedy] Perform the following in the order while checking
whether the error is cleared.
1. Turn OFF and then ON the main power, and check whether
the error is cleared.
2. After deleting the system software using USB memory,
reinstall it using SST or a USB memory.
3. After replacing the Flash PCB, reinstall the system software
using SST or a USB memory.
4. Replace the Main Controller PCB.