Canon imageRUNNER ADVANCE C350 series, Service Manual

Page: 1037 / 1173

9
9
9-60
9-60
Installation > PCL International Font Set-B1 > Installation Procedure > Register Andale Font in the host machine
Installation > PCL International Font Set-B1 > Installation Procedure > Register Andale Font in the host machine
8) Select "Start".
9) A message "Firmware export to the USB storage is completed." will appear. Select "OK".
NOTE:
The folder name "iA500" needs to be changed if the model name differs.
Press the Counter Check button to refer to the displayed model names.
Example: iR-ADV 500(iA500) -> iA500
Andale Font can be registered by a means other than the above. It can be registered by
using SST Ver.4.72 or later.
F-9-156
F-9-157
■ Register Andale Font in the host machine
● Connection
Preparation
Item to prepare: A USB memory device where the system software for this machine has been
registered
Procedure
1) If the host machine is connected with a network cable, disconnect it.
2) Connect the USB memory device to the USB port.
3) Switch to the download mode to use.
In the case of normal mode (Recommended)
Select the following in Service Mode: COPIER > FUNCTION > SYSTEM > DOWNLOAD;
and then press [OK].
• In the case of safe mode (This mode should not be used as general rule. To be used only
when normal startup fails, such as a system error, etc.)
• While pressing 2 + 8 keys at the same time, turn ON the Main Power Switch.
• Once this machine recognizes the USB memory storage device, the following menu is
displayed on the Control Panel.
F-9-158