Canon imageRUNNER ADVANCE C350 series Service Manual Download Page 580

Page: 580 / 1173

6-69

Troubleshooting > Version Upgrade > Version Upgrade via CDS > Error Messages

No.

Messages

Timing of display

Cause

Remedy

13 Delivery Error

Error Code: [xxx]

UGW linkage (Update

Firmware screen)

eRDS sent an order but Updater failed to

connect to the server.

Conduct a communication test to analyze the cause of the error. After solving the cause, resend

the order from the eRDS.

If it recurs, obtain the log etc. (Refer to

"Information required for Reports" under “Version

Upgrade via CDS”, “Version Upgrade” of Chapter 6 “Troubleshooting” of this manual.) and

contact Support Div. of the sales company.

The delivery server stopped.

Contact the sales company's Support Department. After confirming restoration of the delivery

server, re-execute the job.

If it recurs, obtain the log etc. (Refer to

"Information required for Reports" under “Version

Upgrade via CDS”, “Version Upgrade” of Chapter 6 “Troubleshooting” of this manual.) and

contact Support Div. of the sales company.

The scheduled data and time acquired

from delivery server does not exist.

Do the delivery setting from UGW again.

If it recurs, obtain the log etc. (Refer to

"Information required for Reports" under “Version

Upgrade via CDS”, “Version Upgrade” of Chapter 6 “Troubleshooting” of this manual.) and

contact Support Div. of the sales company.

14 Delivery Error

Delivery Time

Delivery Firmware Label

Delivery Firmware version

Error Code: [ xxx ]

UGW linkage (Update

Firmware screen)

The scheduled date and time acquired

from delivery server was before current

time (15 or more min had passed).

Do the delivery setting from UGW again.

If it recurs, obtain the log etc. (Refer to

"Information required for Reports" under “Version

Upgrade via CDS”, “Version Upgrade” of Chapter 6 “Troubleshooting” of this manual.) and

contact Support Div. of the sales company.

Immediate download

(Update Firmware screen)

At the time of immediate download, turned

OFF and then ON the power of device

main body.

Re-execute the job.

If it recurs, obtain the log etc. (Refer to

"Information required for Reports" under “Version

Upgrade via CDS”, “Version Upgrade” of Chapter 6 “Troubleshooting” of this manual.) and

contact Support Div. of the sales company.

Applicable firmware is not registered. On-site (error dialogue)

At the user site, no latest firmware exists. This means the current firmware is the latest, so this error has no impact.

But when the latest firmware to be retrieved must exist e.g. released new firmware information

has been notified, contact Field Support Group in the sales company.

No applicable firmware exists on CDS,

so the service person can't select any

applicable firmware.

Contact the sales company's Support Department.

16 Restart failed.

Turn the main power OFF and ON.

Manual update (error

dialogue)

An error occurred at the time of the device

restart.

After turning OFF and then ON the main power of the device, re-execute the job.

If it recurs, obtain the log etc. (Refer to

"Information required for Reports" under “Version

Upgrade via CDS”, “Version Upgrade” of Chapter 6 “Troubleshooting” of this manual.) and

contact Support Div. of the sales company.

Automatic update (error

dialogue)

An error occurred at the time of the device

restart.

After turning OFF and then ON the main power of the device, re-execute the job.

If it recurs, obtain the log etc. (Refer to

"Information required for Reports" under “Version

Upgrade via CDS”, “Version Upgrade” of Chapter 6 “Troubleshooting” of this manual.) and

contact Support Div. of the sales company.

Specify [E-Mail Address] with up to 64

characters.

At the time of periodical

update setting

The specified E-mail address exceeded 64

characters.

Specify E-mail address within 64 characters.

The following characters cannot be

used for the [E-Mail Address]:

, : ; “ ( ) [ ] < > \

At the time of periodical

update setting

The E-mail address was including the

characters which could not be used.

Do not specify E-mail address with characters which cannot be used.

Specify [Comments] with up to 128

characters.

At the time of periodical

update setting

Comments exceeded 128 characters.

Specify comments within 128 characters.

The [Delivery Server URL] is incorrect. In setting with the deliver

server URL.

The specified deliver server URL is wrong. Enter the right URL(https://device.c-cdsknn.net/cds_soap/updaterif)

T-6-21

Summary of Contents for imageRUNNER ADVANCE C350 series






















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for imageRUNNER ADVANCE C350 series

Reviews:

Brands by name

Popular brands

Canon imageRUNNER ADVANCE C350 series, Service Manual

Search results

Summary of Contents for imageRUNNER ADVANCE C350 series

Reviews:

Brands by name

Popular brands