Canon imageRUNNER ADVANCE C350 series Service Manual Download Page 548

Page: 548 / 1173

6-37

Troubleshooting > Version Upgrade > Version Upgrade using USB Memory Storage Device > Registering System Software

6) Select the “Series”.

7) Select the version to register. After selecting the version, click confirm button.

NOTE:

Only one version can be registered at once. In addition, a single system software can

be registered.

F-6-54

F-6-55

8) Wait for approx. 1 minute so the firmware to be written is displayed. When the following

screen is displayed, click start button.

NOTE:

In the case of using USB1.1, it takes approx. up to 10 minutes for writing. In the case

of using USB2.0, it takes approx. up to 3minutes so it is recommended to use USB

memory supporting USB2.0.

9) When the system software is successfully registered to the USB memory storage device,

click the “OK” button.

F-6-56

F-6-57

Summary of Contents for imageRUNNER ADVANCE C350 series






















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for imageRUNNER ADVANCE C350 series

Reviews:

Canon imageRUNNER ADVANCE C350 series, Service Manual, Page: 548 / 1173

Search results

Summary of Contents for imageRUNNER ADVANCE C350 series

Reviews: