Canon imageRUNNER ADVANCE C350 series, Service Manual

Page: 439 / 1173

4
4
4-132
4-132
Disassembly/Assembly > Image Formation System > Removing the ITB Pressure Release Switch > Procedure
Disassembly/Assembly > Image Formation System > Removing the ITB Pressure Release Switch > Procedure
Removing the ITB Pressure Release Switch
■ Preparation
1) Remove the Rear Cover 1 (Refer to page 4-35) .
2) Remove the Left Upper Cover (to be removed for models equipped with a fax)
(Refer to page 4-37) .
3) Remove the Fax Speaker Unit (to be removed for models equipped with a fax)
(Refer to page 4-105) .
4) Remove the Fax Unit (to be removed for models equipped with a fax)(Refer to page 4-105) .
5) Remove the Main Controller Unit (Refer to page 4-84) .
6) Remove the Low-voltage Power Supply PCB Unit(Refer to page 4-97) .
7) Remove the DC Controller PCB Unit (Refer to page 4-91) .
8) Remove the Main Drive Unit (Refer to page 4-127) .
F-4-334
■ Procedure
1) Remove the ITB Pressure Release Switch [1].
• 1 Connector [2]
• Harness Guide [A]
• 1 Claw [3]
• 2 Hooks [4]
1x
1x
1x
[1]
[2]
[3]
[4]
[4]
[A]
F-4-335