Canon imageRUNNER 3530, Reference Manual

Page: 206 / 460

Specifying Common Settings 4-50
4
Customizin
g Se
ttin
gs
3
Select [Speed] or [Print Side] for each paper source
➞
press
[OK].
Details of each item are shown below.
If [Print Side] is selected for a paper source, and Drawer Eligibility For APS/ADS
in Common Settings (from the Additional Functions screen) is set to 'On', the
Auto Paper Selection and Auto Drawer Switching Settings are ignored. Also, the
machine's printing speed may become slower when you print one-sided
documents.
[Speed]: When you feed one or two-sided prints into the machine, the
method for delivering paper inside the machine changes,
and this affects the printing speed. Therefore, to maximize
the printing speed, load the paper manually as follows:
One-Sided Print: Load the paper face up in a paper drawer,
or face down into the stack bypass. The
side facing up in the paper drawer, and the
side facing down in the stack bypass are
the sides printed on.
Two-Sided Print: Load the paper face down in a paper
drawer, or face up in the stack bypass. The
side facing down in the paper drawer, and
the side facing up in the stack bypass are
the first sides that are printed on.
[Print Side]: If you load paper in the paper drawer and select [Print Side],
no matter whether you are printing one or two-sided prints,
the side of the paper facing down is always the one printed
on first. (The side facing up is the one printed on first for the
stack bypass.) However, some speed will be sacrificed when
printing one-sided prints.