Canon imageRUNNER 3530, Reference Manual

Page: 115 / 460

System Configuration 3-7
3
Opti
ona
l Eq
uipme
n
t
*2 The Department ID Management function is a standard function in this machine. If the optional Card Reader-C1 is
attached, Department ID Management is performed automatically, and you do not have to enter the Department ID
and password manually. The Card Reader-C1 enables you to check the print totals and the remaining number of
pages that can be printed on the touch panel display.
Machine Function
Optional
Equipment Needed
Simultaneous Installation
Required Limitations
Additional
Copy Tray
Right Side
Output Tray
Copy Tray-J1
3 Way Unit-A1
-
Inner
Output Tray
Inner 2 Way Tray-D1
The Inner 2 Way
Tray-D1 cannot be
used with the
Finisher-S1.
Additional Finisher
Tray-B1
3 Way Unit-A1 and
Finisher-S1
The Additional
Finisher Tray-B1
cannot be used with
the Inner 2 Way
Tray-D1.
Collate
Group
Offset
Staple
Finisher-S1 3 Way Unit-A1 -
Hole Punch Puncher Unit-R1
3 Way Unit-A1 and
Finisher-S1
-
Department ID
Management
*2
Card Reader-C1 - -
Additional Paper
Supply
Cassette Feeding
Unit-Y2
- -
Security Management
(Hard Disk and Job
Logs)
UFR II Printer Kit
and iR Security Kit
(activated)
Expansion Bus and
USB Application
Interface Board
To use the Security
Management function,
the iR Security Kit
must be activated
after the Expansion
Bus and USB
Application Interface
Board are installed.