Canon imageRUNNER 3530 Reference Manual Download Page 337

Page: 337 / 460

Replacing the Toner Cartridge

7-37

utine Main

nance

Lift up the lever until it becomes vertical.

IMPORTANT

Make sure that the

▼

(down arrow) on the lever is aligned with the

▲

(up arrow) of

the

(Unlock) icon position before proceeding.

Pull the toner cartridge out of the toner supply port.

Pull the toner cartridge out halfway, and then remove it completely while
supporting it and keeping it straight with your other hand from underneath.

CAUTION

Do not touch the tip of the toner cartridge or subject it to shock by hitting
it. Doing so may cause the toner cartridge to leak.

Summary of Contents for imageRUNNER 3530













































































































































































































































































































































































































































































Search results

Summary of Contents for imageRUNNER 3530

Reviews:

Related manuals for imageRUNNER 3530

Brands by name

Popular brands

Canon imageRUNNER 3530, Reference Manual

Search results

Summary of Contents for imageRUNNER 3530

Reviews:

Related manuals for imageRUNNER 3530

Brands by name

Popular brands