Canon imageRUNNER 3530, Reference Manual

Page: 311 / 460

Envelope Feeder Attachment-C1 (Optional) 7-11
7
Ro
utine Main
te
nance
IMPORTANT
•
When you attach the envelope feeder attachment to the paper drawer, do not forcefully
move the front guide of the paper drawer in the wrong direction. Doing so may detach the
envelope feeder attachment from the paper drawer.
•
Do not print on both sides of an envelope. Doing so may cause paper jams, dirty prints,
or make the inside of the machine dirty.
•
Do not load the following types of envelopes inside the envelope cassette. Doing so may
cause paper jams, dirty prints, or make the inside of the machine dirty.
- Curled, creased, or folded envelopes
- Very thick or thin envelopes
- Damp or wet envelopes
- Torn envelopes
- Irregularly shaped envelopes
- Envelopes with clasps or windows
- Envelopes that have already been sealed
- Envelopes with holes or perforations
- Envelopes with specially coated surfaces
- Envelopes made of surface treated colored paper
- Envelopes that are self-sticking, which use ink, glue, or other substances that can melt,
burn, vaporize, or emit smells under the heat of a fixing unit (approximately 418 ).
Depending on the materials used for the seal, the glue may melt under the fixing unit's
heat, sealing the envelopes.
•
If the optional Copy Tray-J1 and Finisher-S1 are attached, envelopes are output to any
output tray other than the Copy Tray-J1, even if the Copy Tray-J1 is designated as the
output tray destination.
•
If the optional Copy Tray-J1 and Inner 2 Way Tray-D1 are attached, envelopes are output
to any output tray other than the Copy Tray-J1, even if the Copy Tray-J1 is designated as
the output tray destination.
•
If you are printing on envelopes, empty the output tray when up to 10 printed envelopes
accumulate in the tray.
•
Envelopes should be stored in a place away from high-temperatures and humidity.
•
If there is a temperature difference between the location where the envelopes were
stored and the location where the envelopes are being printed, leave the envelopes in the
printing location at room temperature before you use them.
•
Correctly match the paper size dial, size switch, and Envelope Cassette settings in
Common Settings (from the Additional Functions screen) with the size of the envelopes
being loaded. Failure to do so may cause paper jams, dirty prints, or make the inside of
the machine dirty.