Canon imageRUNNER 3530, Reference Manual

Page: 111 / 460

System Configuration 3-3
3
Opti
ona
l Eq
uipme
n
t
a Platen Cover Type H
The Platen Cover Type H secures the originals
placed on the platen glass.
b Feeder (DADF-N1)
Originals placed in the feeder are automatically
fed sheet by sheet onto the platen glass for
scanning. The feeder also automatically turns
over two-sided originals to make one or
two-sided copies.
c Card Reader-C1
The Card Reader-C1 enables Department ID
Management to be performed automatically.
d Copy Tray-J1
The Copy Tray-J1 provides an additional paper
output tray.
e 3 Way Unit-A1
The 3 Way Unit-A1 is required to attach the Inner
2 Way Tray-D1, Finisher-S1, or Copy Tray-J1 to
the main unit.
f Cassette Feeding Unit-Y2
The Cassette Feeding Unit-Y2 provides two
additional sources of paper for printing jobs.
Each paper drawer holds up to 550 sheets of
paper (20 lb bond (80 g/m
2 )).
g Inner 2 Way Tray-D1
The Inner 2 Way Tray-D1 is equipped with the
following features: Collate, Group, and Rotate.
h Envelope Feeder Attachment-C1
The Envelope Feeder Attachment-C1 can only
be attached to Paper Drawer 1, and holds only
envelopes.
i Puncher Unit-R1
The Puncher Unit-R1 can be attached to the
optional Finisher-S1, and is equipped with the
Hole Punch mode.
j Finisher-S1
The Finisher-S1 is equipped with the following
features: Collate, Group, Offset, and Staple
(Corner).
k Additional Finisher Tray-B1
The Additional Finisher Tray-B1 can be attached
to the optional Finisher-S1 to provide an
additional paper output tray.
NOTE
Either the optional Platen Cover Type H or Feeder (DADF-N1) can be attached to the
main unit.