Canon imageRUNNER 3530 Reference Manual Download Page 319

Page: 319 / 460

Envelope Feeder Attachment-C1 (Optional)

7-19

utine Main

nance

Pull and lift the paper drawer out of the machine by holding its
left and right sides with both hands.

Remove all of the envelopes that are loaded in the paper
drawer (several envelopes at a time).

Remove the left guide of the envelope feeder attachment, and
insert the left guide into the appropriate slot for the desired
envelope size.

To remove the left guide, tilt the left guide to the right, and then pull it up.

Summary of Contents for imageRUNNER 3530













































































































































































































































































































































































































































































Search results

Summary of Contents for imageRUNNER 3530

Reviews:

Related manuals for imageRUNNER 3530

Brands by name

Popular brands

Canon imageRUNNER 3530, Reference Manual

Search results

Summary of Contents for imageRUNNER 3530

Reviews:

Related manuals for imageRUNNER 3530

Brands by name

Popular brands