Canon imageRUNNER 3530 Reference Manual Download Page 222

Page: 222 / 460

Timer Settings

4-66

Customizin

g Se

ttin

❑

Press [End Date]

➞

select the month, day, and time for which Daylight Saving

Time ends

➞

press [OK].

❑

Press [OK].

NOTE

•

If you set Daylight Saving Time, the machine automatically sets the standard time
of the machine one hour forward at the specified date and time.

•

The default setting is 'On'. (Between 2:00 a.m. on the first Sunday of April, and 2:00
a.m. on the last Sunday of October.)

•

You can also use

(numeric keys) to enter the time, and

(Clear) to clear

your entry.

•

You can change the value entered under <Time> by pressing [-] or [+], even if you
entered the value using

(numeric keys).

•

The time can be set in one hour increments, from 0 to 23 hours.

Press [OK].

The selected mode is set.

Summary of Contents for imageRUNNER 3530













































































































































































































































































































































































































































































Search results

Summary of Contents for imageRUNNER 3530

Reviews:

Related manuals for imageRUNNER 3530

Brands by name

Popular brands

Canon imageRUNNER 3530, Reference Manual

Search results

Summary of Contents for imageRUNNER 3530

Reviews:

Related manuals for imageRUNNER 3530

Brands by name

Popular brands