Canon Arizona 1300 Series User Manual Download Page 18

Page: 18 / 248

The following labels are used in the machine to identify and categorize the severity level of the

hazard:

Label

Type

Description

WARNING

General warning sign.

WARNING

Risk of electric shock.
Hazardous electrical parts inside. Do not remove the cover.

CAUTION

Hot part or hot surface.
Risk of burned fingers when handling the parts, do not touch.

CAUTION

Crushing of hands.

CAUTION

UV light.

CAUTION

Bright light.

CAUTION

Infrared light.

WARNING

Electricity: Main connection for protective earth.

WARNING

Electricity: Main connection for protective earth.

Label

Type

Description

PROHIBITED

Do not walk or stand here.

PROHIBITED

No access.

Label

Type

Description

WARNING

Shock hazard.
Disconnect all power plugs from electrical outlet for pur-
poses of maintenance.

Safety and Environment Information

Chapter 3 - Safety Information

Summary of Contents for Arizona 1300 Series

























































































































































































































































Search results

Summary of Contents for Arizona 1300 Series

Reviews:

Related manuals for Arizona 1300 Series

Brands by name

Popular brands

Canon Arizona 1300 Series, User Manual

Search results

Summary of Contents for Arizona 1300 Series

Reviews:

Related manuals for Arizona 1300 Series

Brands by name

Popular brands