B-50
AMI Configuration Commands
B.6.3.3
Setting Traffic Models on a Network Module
This command lets the user select one of the traffic memory models for a spe-
cific network module.
NOTE:
This command applies to FORE Systems’
Series C network modules only.
Enter the following parameters:
localhost::configuration module traffic>
setmodel <module> <model>
module
Indicates which network module is to be configured.
model
Indicates the predefined memory model to be used
for this network module. The various models make
different trade-offs between the number of cell buff-
ers, and the number of unicast and multicast connec-
tions.
NOTE:
The switch software must be restarted for this
command to take effect.
Summary of Contents for MMAC-Plus SFCS-1000
