Cabletron Systems MMAC-Plus SFCS-1000, Configuration Manual

Page: 295 / 404

B-143
AMI Configuration Commands
B.19 Virtual Path Configuration Commands
These commands let the user configure virtual paths. The user can display the
list of available subcommands by typing
vpc ? at the configuration level.
localhost::configuration>
vpc ?
delete modify new show
B.19.1 Deleting a Virtual Path
This command lets the user delete an existing virtual path. Enter the follow-
ing parameters:
localhost::configuration vpc>
delete <port> <vpi> (<port> <vpi> | term | orig)
port Indicates the number of the input port on which the
virtual path is to be deleted.
vpi Indicates the number of the input VPI to be deleted.
port Used to delete a through path. Indicates the number
of the output port on which the through path is to be
deleted.
vpi Used to delete a through path. Indicates the number
of the output VPI to be deleted.
term Used to delete a terminating path.
orig Used to delete an originating path.
NOTE:
Virtual Path 0 cannot be deleted on any of the
connections to the intra-fabric ports on an
SFCS-1000.
NOTE:
Before deleting a virtual path, you must first
delete all VCCs which use that path.