Cabletron Systems MMAC-Plus SFCS-1000, Configuration Manual

Page: 299 / 404

B-147
AMI Configuration Commands
-vbrbuffob <percent> Indicates the buffer overbooking level assigned to
this path, specified as a percentage. Enter an integer
value greater than or equal to
1 . The default is 100 ,
which means that no overbooking has been defined.
Values less than
100 cause underbooking. Values
greater than 100 denote overbooking.
NOTE:
If you want to shape traffic on more than two
ports on a given network module, it is recom-
mended that you set the traffic memory
model to model number 5 for that network
module. Please see the sections, Displaying
Traffic Models for a Network Module, and,
Setting Traffic Models on a Network Module,
found earlier in this chapter for information
about how to do this.
NOTE:
Terminating and originating paths cannot be
created across the intra-fabric ports on an
SFCS-1000; only through paths can be created
across the intra-fabric ports as shown in the
following example.