Cabletron Systems MMAC-Plus SFCS-1000, Configuration Manual

Page: 30 / 404

1-8
Configuring PVCs
MaxBW Shows the maximum amount of bandwidth (in
megabits/second) that is available for the virtual
channels using this path.
BW Shows the amount of bandwidth (in megabits/
second) that has been reserved for the virtual
channels using this path.
MaxVCs Lists the maximum number of virtual channels
that may use this originating or terminating path.
VCs Lists the number of virtual channels that are cur-
rently using this originating or terminating path.
UPC Shows the integer index that refers to a specific
traffic contract assigned to this path.
Protocol Indicates
pvc
for a Permanent Virtual Circuit,
spans
for a Switched Virtual Circuit, or
uni
for a
UNI 3.0 signalling path.
To list advanced information about all of the existing virtual paths, enter the
following parameters:
configuration vpc show advanced
Input Output
Port VPI Port VPI Shape VBROB BuffOB
1C1 0 terminate N/A N/A N/A
1C2 0 terminate N/A N/A N/A
1C3 0 terminate N/A N/A N/A
1C4 0 terminate N/A N/A N/A
1D1 0 terminate N/A N/A N/A
1D2 0 terminate N/A N/A N/A
1D3 0 terminate N/A N/A N/A
1D4 0 terminate N/A N/A N/A
1CTL 0 terminate N/A N/A N/A
originate 1C1 0 100 100
originate 1C2 0 100 100
originate 1C3 0 100 100
originate 1C4 0 100 100
originate 1D1 0 100 100
originate 1D2 0 100 100
originate 1D3 0 100 100
originate 1D4 0 100 100
originate 1CTL 0 100 100