Cabletron Systems MMAC-Plus SFCS-1000, Configuration Manual

Page: 277 / 404

B-125
AMI Configuration Commands
The fields in this display are defined as follows:
Switch NSAP prefix Displays the switch’s NSAP prefix.
Switch Prefix Mask Shows the switch prefix mask value of high-order
bits to use for aggregating addresses on the switch
for routing purposes.
Peer Group Mask Lists the peergroup mask value of high-order bits to
use for aggregating addresses on the switch for rout-
ing purposes.
Hello Indication Interval Displays the period of time between transmissions of
hello indication messages, in milliseconds.
NSAP Indication Interval Shows the period of time between transmissions of
NSAP indication messages, in milliseconds.
Static Route Update Inter-
val
Lists the period of time between transmissions of
static route update indication messages, in millisec-
onds.
Max hop count for NSAP
router
Displays the maximum number of hops to use when
routing a connection for the NSAP router.
Proportional Multiplier Shows the threshold, in percentage, above which the
change in ACR on any link is considered to be signif-
icant.
Minimum Threshold for
NSAP updates
Lists the minimum threshold bandwidth value for
triggering NSAP updates, in kilobits per second.
Minimum VC level Lists the minimum number of VCs that need to be
available on a path to make that path usable again
after the number of available VCs has dropped to
zero.
FORE PNNI border switch
functionality is disabled
If this functionality is
enabled
, this switch acts as a
ForeThought PNNI border switch. If this functionality
is
disabled
, this switch does not act as a ForeThought
PNNI border switch.