Cabletron Systems MMAC-Plus SFCS-1000, Configuration Manual

Page: 243 / 404

B-91
AMI Configuration Commands
ber.
CBR Qsize Displays the reserved queue size for CBR traffic. The
default setting is 256 cells.
CBR CDV Shows the maximum cell delay variation for CBR
traffic specified in microseconds.
VBR Qsize Displays the reserved queue size for VBR traffic. The
default setting is 256 cells.
VBR CDV Shows the maximum cell delay variation for VBR
traffic specified in microseconds.
ABR-UBR Qsize Displays the reserved queue size for ABR/UBR traf-
fic. The default setting is 256 cells.
ABR-UBR EFCI-ON Shows the value at which the EFCI will be set
(turned on) when the threshold number is reached,
signalling congestion, for ABR and UBR traffic.
ABR-UBR EFCI-OFF Shows the value at which the EFCI will be cleared
(turned off) when the threshold number is reached,
indicating no congestion, for ABR and UBR traffic.
The fields in the port priority queues display are defined as follows:
Port Shows the port that has been configured. The 4 indi-
cates the fourth switch fabric, the letter indicates the
position of the network module in the switch fabric,
and the 1, 2, 3, or 4 indicates the specific port num-
ber.
Priority Indicates the type of traffic for this port.
CLP Threshold Lists the value at which cells that have been tagged
as non-conforming will be dropped for this priority
and port. This parameter can not be changed.
Qsize Dedicated Displays the reserved queue size for the type of traf-
fic specified in the Priority field. This parameter can
not be changed.
Qsize Current Shows the amount of the reserved queue size that
has already been used on this port for the specified
type of traffic.
TxCells Lists the amount of traffic that has been transmitted
on this port for the specified type of traffic.
LostCells Shows the number of cells dropped on this port for
the specified type of traffic.