B-89
AMI Configuration Commands
B.8.10.3
Configuring Port Queue Size
This command enables the user to designate the dedicated queue size for a
given type of traffic on a specified port.
NOTE:
This command applies to FORE Systems’
Series C network modules only.
Enter the following parameters:
localhost::configuration port traffic>
qsize <port> (CBR | VBR | ABR) <number of cells>
port
Indicates the port on which the dedicated queue size
will be set.
CBR|VBR|ABR
Indicates for which type of traffic (CBR, VBR, or
ABR) to set the dedicated queue size.
number of cells
Indicates the queue size to be assigned to the traffic
designated in the previous parameter. The default is
256 cells.
NOTE:
The switch control software must be restarted
for this command to take effect.
Summary of Contents for MMAC-Plus SFCS-1000
