Cabletron Systems MMAC-Plus SFCS-1000, Configuration Manual

Page: 171 / 404

B-19
AMI Configuration Commands
B.4.7 Displaying the IP Interface Configuration
This command allows the user to display information about the configuration
of the IP interfaces. Enter the following parameters:
localhost::configuration ip>
show
interface state address netmask broadcast
ie0 up 169.144.48.21 255.255.255.0 169.144.48.0
asx0 up 169.144.60.21 255.255.255.0 169.144.60.0
qaa0 up 169.144.64.21 255.255.255.0 169.144.64.0
qaa1 down
qaa2 down
qaa3 down
lo0 up 127.0.0.1 255.0.0.0 127.0.0.0
el0 up 169.144.200.21 255.255.255.0 169.144.200.0
el1 up 169.144.204.21 255.255.255.0 169.144.204.0
el2 up 169.144.205.21 255.255.255.0 169.144.205.0
el3 up 169.144.206.21 255.255.255.0 169.144.206.0
IP Forwarding State: forwarding
The fields in this display are defined as follows:
interface Indicates the name of the IP interface.
state Lists the administrative state of the IP interface.
address Displays the IP address of the IP interface.
netmask Shows the netmask address of the IP interface.
broadcast Indicates the broadcast address of the IP interface.
The user may also designate a single interface to be displayed by entering
show and the specific interface name at the prompt as follows:
localhost::configuration ip>
show ie0
interface state address netmask broadcast
ie0 up 169.144.48.21 255.255.255.0 169.144.48.0
IP Forwarding State: forwarding
The fields in this display are defined in the same manner as those listed above
in the example for showing the configuration of all of the IP interfaces.