Cabletron Systems MMAC-Plus SFCS-1000, Configuration Manual

Page: 170 / 404

B-18
AMI Configuration Commands
B.4.6.2 Deleting an IP Route
This command lets the user delete an IP route. Enter the following parame-
ters:
localhost::configuration ip route>
delete (default|<destination-ipaddress>) <gateway>
default A default must be specified to delete a default route.
destination-ipaddress Indicates the destination IP network number.
gateway Indicates the gateway address to the destination IP
network number.
B.4.6.3 Showing the IP Routes
This command lets the user display the current IP routes. Enter the following
parameters:
localhost:: configuration ip route>
show
Destination Gateway Metric Interface Flags
default 169.144.48.1 1 le0 G
169.144.48.0 169.144.48.21 0 le0
169.144.60.0 169.144.60.21 0 asx0
169.144.64.0 169.144.64.21 0 qaa0
169.144.200.0 169.144.200.21 0 el0
169.144.204.0 169.144.204.21 0 el1
169.144.205.0 169.144.205.21 0 el2
169.144.206.0 169.144.206.21 0 el3
The fields in this display are defined as follows:
Destination Displays the destination IP network.
Gateway Shows the gateway address to the destination IP net-
work number.
Metric Lists the number of hops to the destination IP net-
work. The default is
1
.
Interface Displays the local IP interface used to get to the des-
tination IP network.
Flags Lists
H
if the route is host-specific (created with the
RTF_HOST flag set). Lists
G
if the route is network-
specific (created with the RTF_GATEWAY flag set).