Cabletron Systems MMAC-Plus SFCS-1000, Configuration Manual

Page: 366 / 404

E-6
SNMP Configuration
38 asxSonetPathLabelOn This trap indicates that the specified SONET port is
receiving and errored C2 Path Label byte. Reference
Bellcore Document TA-NWT-000253 Section 3.3.2.3
and 6.3.1.1.8 the Path Label (C2) byte should have the
value 0x13.
39 asxSonetPathLabelOff This trap indicates that the Errored Path Label (C2)
byte error condition signalled by the asxSonetPathLa-
belOn trap has been cleared.
40 asxSonetLineAISon This trap indicates that the specified SONET port is
receiving a Line level Alarm Indication Signal from the
far-end equipment.
41 asxSonetLineAISoff This trap indicates that the Line AIS error condition
signalled by the asxSonetLineAISon trap has been
cleared.
42 asxDS3FERFOn This trap indicates that the specified DS3 port is in the
DS3 Yellow Alarm or FERF state. The FERF or DS3 Yel-
low alarm is declared if either OOF(LOF), LOS or AIS
is detected and persists for 2.5+- .5 seconds.
43 asxDS3FERFOff This trap indicates that the specified DS3 port is no
longer in the FERF or DS3 Yellow Alarm state.
44 asxDS3PLCPYellowOn This trap indicates that the specified DS3 port is in the
PLCP Yellow Alarm state. The Yellow alarm is
declared if PLCP LOF is detected and persists for
2.5+- .5 seconds.
45 asxDS3PLCPYellowOff This trap indicates that the specified DS3 port is no
longer in the PLCP Yellow Alarm state.
46 asxDS3PLCPYellowDetected This trap indicates that the specified DS3 port has
detected incoming Yellow Alarm.
47 asxDS3PLCPYellowCleared This trap indicates that the specified DS3 port has
detected clearance of incoming Yellow Alarm.
48 asxDS3PLCPLOFDetected This trap indicates that the specified DS3 port has
detected incoming LOF Alarm.
Table E.2 - SNMP Traps Supported on the SFCS Switches
Trap
Number
Trap Name Description