Cabletron Systems MMAC-Plus SFCS-1000, Configuration Manual

Page: 164 / 404

B-12
AMI Configuration Commands
B.3.2 Displaying the Board Configuration
This command shows the current configuration of the switch board. Enter the
following parameters:
localhost::configuration board>
show
Board Version Model S/N NMs VPIerrors VCIerrors ClockScale MulticastMode
1 1.0 asx200bx 4465 4 2665 1469 1 extended
The fields in this display are defined as follows:
Board This is the number of the board (switch fabric) being
managed.
Version Designates the hardware version number.
Model Displays what type of board this is.
S/N Indicates the serial number.
NMs Shows the number of installed network modules.
VPIerrors Lists the VPI lookup error cells arriving at the switch
on an unknown VPI.
VCIerrors Displays the VCI lookup error cells.
ClockScale Lists the factor by which the clock is being scaled for
traffic policing.
MulticastMode If the switch contains any Series A or B network
modules, the switch operates in mixed (non-
extended) mode. Otherwise, the switch uses the
added Series C functionality and operates in
extended mode. For complete information about
non-extended and extended mode, please see
Appendix A, Hardware Maintenance Procedures, in
the ATM Switch User’s Manual.