Cabletron Systems MMAC-Plus SFCS-1000, Configuration Manual

Page: 287 / 404

B-135
AMI Configuration Commands
B.17.2 Creating a UPC Traffic Contract
This command allows the user to create a UPC contract. Enter the following
parameters:
localhost::configuration upc>
new <index> [<UPC>] [-cdvt <us>] [aal5epd] [-name <name>]
Where UPC is one of the following combinations of traffic parameters:
ubr
cbr <pcr01>
cbr0 <pcr0> <pcr01> [tag]
vbr <pcr01> <scr01> <mbs01>
vbr0 <pcr01> <scr0> <mbs0> [tag]
index Enter an integer index that will be used to refer to
this specific traffic contract.
UPC Indicates one of the types of traffic contracts shown
above. The parameters in these contracts are defined
as follows:
ubr Indicates UBR traffic.
cbr Indicates CBR traffic.
cbr0 Indicates CBR0 traffic.
vbr Indicates VBR traffic.
vbr0 Indicates VBR0 traffic.
<pcr0> Indicates the peak cell rate for cells with CLP = 0.
<pcr01> Indicates the peak cell rate for all cells.
<scr0> Indicates the sustainable cell rate for cells with CLP = 0.
<scr01> Indicates the sustainable cell rate for all cells.
<mbs0> Indicates the maximum burst size for cells with CLP = 0.
<mbs01> Indicates the maximum burst size for all cells.
NOTE:
The units for pcr0 , pcr01 , scr0 , scr01 , mbs0 ,
and mbs01 are specified either in cells per
second or in kilobits per second, depending
on what you have configured for
configura-
tion system units . To display the current set-
ting, use configuration system show . The
default is cps (cells per second).