Cabletron Systems MMAC-Plus SFCS-1000, Configuration Manual

Page: 285 / 404

B-133
AMI Configuration Commands
MaxVCI Displays the top number for the range of VCIs to be
reserved for UNI 3.0 signalling messages. The
default is
511 .
SigBW Shows the amount of bandwidth that is reserved on
the UNI 3.0 signalling VCI. The default is
0
.
ILMIBW Lists the amount of bandwidth that is reserved on
the ILMI VCI. The default is
0 .
To list UNI 3.0 signalling path information for a specific port, (for example,
port 1C1), enter the following parameters:
localhost::configuration uni30>
show 1c1
Port VPI State ILMI UNIside Type OperType RemoteAddress
1C1 0 down down network auto privateUNI
The fields in this display are defined in the same manner as those listed previ-
ously in the example for displaying UNI 3.0 signalling path information on all
of the ports on an individual switch fabric.
To list UNI 3.0 signalling path information for a specific port and path, (for
example, port 1C1 and VPI 0), enter the following parameters:
localhost::configuration uni30>
show 1c1 0
Port VPI State ILMI UNIside Type OperType RemoteAddress
1C1 0 down down network auto privateUNI
The fields in this display are defined in the same manner as those listed previ-
ously in the example for displaying UNI 3.0 signalling path information on all
of the ports on an individual switch fabric.
To list advanced UNI 3.0 signalling path information for a specific port and
path, (for example, port 1C1 and VPI 0), enter the following parameters:
localhost::configuration uni30>
show 1c1 0 advanced
Port VPI SigVCI ILMIVCI SigAAL MinVCI MaxVCI SigBW ILMIBW
1C1 0 5 16 5 32 511 0 0
The fields in this display are defined in the same manner as those listed previ-
ously in the example for displaying advanced UNI 3.0 signalling path infor-
mation on all of the ports on an individual switch fabric.