Cabletron Systems MMAC-Plus SFCS-1000, Configuration Manual

Page: 245 / 404

B-93
AMI Configuration Commands
B.8.11 VBROB Port Configuration Commands
This command is an advanced option that allows the user to set an output
bandwidth overbooking level for VBR traffic on a particular port. Enter the
following parameters:
localhost::configuration port>
vbrob <port> <percent>
port Indicates the port number on which the bandwidth
overbooking level for VBR traffic is to be changed.
percent Indicates the bandwidth overbooking level assigned
to this port, specified as a percentage. Enter an inte-
ger value from 1 to 500. The default is 100, which
indicates that no overbooking will occur. Values less
than 100 cause underbooking. Values greater than
100 denote overbooking.
B.8.12 VBRBuffOB Port Configuration Commands
This command is an advanced option that allows the user to set an output
buffer overbooking level for VBR traffic on a particular port. Enter the follow-
ing parameters:
localhost::configuration port>
vbrbuffob <port> <percent>
port Indicates the port number on which the buffer over-
booking level for VBR traffic is to be changed.
percent Indicates the buffer overbooking level assigned to
this path, specified as a percentage. Enter an integer
value greater than or equal to 1. The default is 100,
which means that no overbooking has been defined.
Values less than 100 cause underbooking. Values
greater than 100 denote overbooking.