Cabletron Systems MMAC-Plus SFCS-1000, Configuration Manual

Page: 203 / 404

B-51
AMI Configuration Commands
B.6.3.4 Displaying Traffic on a Network Module
This command enables the user to display traffic model information on the
network modules.
NOTE:
This command applies to FORE Systems’
Series C network modules only.
Enter the following parameters:
localhost::configuration module traffic>
show
Module Model Unicasts Mcasts McastOuts Cells Shared Used EPD FIFOblock
1B 1 10 0 0 0 1232 0 1109 normal
The fields in this display are defined as follows:
Module Shows the network module that has been configured.
The number indicates the switch fabric and the letter
indicates the position of the network module in the
switch fabric.
Model Indicates the memory model used for this network
module.
Unicasts Displays the current number of active unicast con-
nections on this network module.
Mcasts Shows the current number of multicast inputs on this
network module.
McastOuts Lists the current number of active multicast outputs
on this network module.
Cells Displays the current number of active cells on this
network module.
Shared Indicates the amount of shared memory allocated to
this network module.
Used Shows the amount of shared memory currently in
use on this network module.
EPD Lists the threshold, specified in cells, for Early Packet
Discard on this network module.
FIFOblock Displays whether or not FIFO blocking is enabled on
this network module.