9A656-04/9A686-04 Configuration Guide
2-83
Creating a PVC
C
Confirmation that the selected interface and VPI/VCI pair has been assigned to the traffic
descriptor value 10.
After these steps have been completed for the receive side of the first interface, the same
configuration must be performed for the receive side of the second interface. In this case, the
SNMP command line would be:
snmpset -h 134.141.87.75 1.3.6.1.2.1.37.1.7.1.6.70102.2.50 Integer 10
2.31.5 Setting the Traffic Descriptor for the Transmit
Side of the Interfaces
This section provides instructions on setting the traffic descriptors for the transmit side of both
interfaces. Refer to
Figure 2-36
.
Figure 2-36
Setting the Traffic Descriptor (Transmit Side)
Figure 2-34
contains 3 callouts that display status information, and the configuration fields
necessary to set the transmit traffic descriptor of the first interface. The definitions for the
callouts are as follows:
A
B
C
Summary of Contents for 9A656-04
