Cabletron Systems 9A656-04, Configuration Manual

Page: 32 / 172

Chapter 2: System Configuration
2-2 9A656-04/9A686-04 Configuration Guide
• Viewing current SmartSwitch 9500 power supply information via the Chassis Power
Screen.
• Configuring ILMI to set minimum and maximum VCI and VPI levels of SVCs and SVPCs
and to reserve VCI/VPI pairs for PVCs.
• Changing the NSAP prefix of the SmartSwitch 9500 from the default value.
• Changing the PNNI addressing mode, and PNNI level from the default values.
• Configuring the EPD/PPD percentage for individual modules in the chassis.
• Configuring SPVCs and SPVPs.
• Changing the management LAN Emulation Client from the default values.
• Using the Network Tools suite of commands for additional status and configuration
operations.
• Viewing the current status of the Environmental Module of the SmartSwitch 9500 chassis,
configuring the settings of the COM ports of the EM, and instructions on downloading a
new firmware image to Flash memory of the EM.
• Creating a PVC via the AToM MIB.
2.1 SELECTING LOCAL MANAGEMENT MENU SCREEN ITEMS
Select items on a menu screen by performing the following steps:
1. Use the arrow keys to highlight a menu item.
2. Press ENTER. The selected Local Management screen displays.
2.2 EXITING LOCAL MANAGEMENT SCREENS
There are two ways to exit Local Management (LM).
Using the EXIT Command
To exit an LM screen using the EXIT command, proceed as follows:
1. Use the arrow keys to highlight the EXIT command at the bottom of the Local
Management screen.
2. Press ENTER. The Password screen displays and the session ends.
Using the RETURN Command
1. Use the arrow keys to highlight the RETURN command at the bottom of the Local
Management screen.
2. Press ENTER. The previous screen in the Local Management hierarchy displays.