Cabletron Systems 9A656-04, Configuration Manual

Page: 111 / 172

9A656-04/9A686-04 Configuration Guide 2-81
Creating a PVC
2.31.3 Setting the Instance of the First Interface
This section provides instructions on setting the Instance of the interfaces. Refer to
Figure 2-34 .
Figure 2-34 Setting the Instance
Figure 2-34 contains 3 callouts that display status information, and the configuration fields
necessary to set the instance of the first interface. The definitions for the callouts are as
follows:
A
Displays the name of the MIB command used to perform this procedure (atmVclRowStatus)
and the OID string the SNMP application is using to access this information
(1.3.6.1.2.1.37.1.7.1.13).
B
Displays the instance that has been entered for this PVC (70101.2.50) This indicates that the
interface selected is 70101, and it has been assigned a VPI/VCI pair of 2.50. This also displays
the setting that this interface has been assigned (createandWait).
C
Confirmation that the selected interface and VPI/VCI pair has been successfully configured to
createandWait status.
A
B
C