Chapter 2: System Configuration
2-48
9A656-04/9A686-04 Configuration Guide
SOURCE VPI ENTRY (Modifiable)
Used to enter the VPI of the source end of the SPVC. If the 9A686-04 is using the default
ILMI settings, the available range for this field is between 33 and 4095.
SOURCE VCI ENTRY (Modifiable)
Used to enter the VCI of the source end of the SPVC. If the 9A686-04 is using the default
ILMI settings, the available range for this field is between 33 and 16k.
SOURCE ATM ADDRESS (Modifiable)
Used to enter the ATM Address of the source end of the SPVC or SPVP.
DESTINATION VPI ENTRY (Modifiable)
Used to enter the VPI of the destination end of the SPVC. Any information entered in this field
MUST also be assigned to the device that will support the destination end of the SPVC.
DESTINATION VCI ENTRY (Modifiable)
Used to enter the VCI of the destination end of the SPVC. Any information entered in this
field MUST also be assigned to the device that will support the destination end of the SPVC.
DESTINATION ATM ADDRESS (Modifiable)
Used to enter the ATM Address of the source end of the SPVC or SPVP.
ATOM Persistence is: (Read-only)
Displays the current setting of ATOM Persistence. This will display “ON” or “OFF”. “ON”
signifies that in the event that the 9A686-04 module or SmartSwitch 9500 chassis is reset, the
SPVC or SPVP will still exist after boot up. “OFF” signifies that if the module or chassis is
reset, the SPVC or SPVP will be lost upon boot up. The default setting for this field is “ON”.
NOTE
If the ILMI settings have been changed from the default values, the available range
of this field depends on the current ILMI settings. Refer to
Section 2.17
and
Chapter 3
for more information on ILMI.
NOTE
If the ILMI settings have been changed from the default values, the available range
of this field depends on the current ILMI settings. Refer to
Section 2.17
and
Chapter 3
for more information on ILMI.
NOTE
Ensure that the device that will support the destination end of the SPVC can
support the VPI value entered in this field. If the destination device is another
9A686-04, refer to
Section 2.17
and
Chapter 3
for information on ILMI and available
VPI/VCIs.
NOTE
Ensure that the device that will support the destination end of the SPVC can
support the VCI value entered in this field. If the destination device is another
9A686-04, refer to
Section 2.17
and
Chapter 3
for information on ILMI and available
VPI/VCIs.
Summary of Contents for 9A656-04
