Cabletron Systems 9A656-04, Configuration Manual

Page: 125 / 172

9A656-04/9A686-04 Configuration Guide Page 3-7
ILMI Configuration Screen
3.3 ILMI CONFIGURATION SCREEN
Local management of the SmartSwitch 9500 allows the user to specify minimum and
maximum values for VCI and VPIs for all SVCs and SPVCs that the SmartSwitch 9500 will
use while establishing connections.
Table 3-1 provides the default settings ILMI uses when
first connected to the ATM network. Table 3-2 displays the available range of VCI/VPI pairs
that ILMI may be configured to allow for requested connections.
Table 3-1 Default Minimum and Maximum VCI and VPI Values for SVCs and SVPCs
Table 3-2 Minimum and Maximum VCI and VPI Ranges
The main purpose of the ILMI configuration screen is to limit the range of VPI/VCI pairs for
SVC connections. In the default setting, there are no VPI/VCI pairs reserved for PVCs. Refer
to
Figure 3-3 .
NOTE
Section 2.16 in Chapter 2 describes how to use the ILMI Configuration screen to
change the settings from their default values.
Minimum VCI for SVCs
(MIN SVCC VCI field)
33
Maximum VPI for SVCs
(MAX SVCC VPI field)
4095
Maximum VPI for VPCs
(MAX SVPC VPI field)
4095
Type Minimum Value Maximum Value
VCI for SVCs 33 16k
Maximum VPI for SVCs 0 4095
Maximum VPI for VPCs 0 4095