Cabletron Systems 9A656-04, Configuration Manual

Page: 66 / 172

Chapter 2: System Configuration
2-36 9A656-04/9A686-04 Configuration Guide
2.19 MODULE CONFIGURATION MENU SCREEN
The Module Configuration screen contains five menu items that allow for the viewing of the
current status of all front panel interfaces, and any errors that have occurred on front panel
interfaces. It also provides access to screens that allow the user to configure the EPD/PPD
feature, and create SPVCs and SPVPs. To access the Module Configuration Menu screen,
perform the following steps:
1. Use the arrow keys to highlight the MODULE CONFIGURATION menu item from the
Configuration Menu screen.
2. Press ENTER. The Module Configuration Menu screen, Figure 2-20 , displays.
Figure 2-20 Module Configuration Menu Screen
2.19.1 Module Configuration Menu Screen Fields
The following section describes each of the Module Configuration Menu screen fields:
PORT STATUS
The port status screen is a read-only screen that displays current status information for all
ATM interfaces. Status information includes physical link state, ILMI state, stack type and
state, and the number of times the link and stack status has changed.
PORT ERRORS
The port errors screen displays any errors that have occurred on ATM interfaces. This screen
specifies on which interface the error occurred, and whether the error occurred on a cell that
was received by the interface, or transmitted by the interface.