Cabletron Systems 9A656-04, Configuration Manual

Page: 54 / 172

Chapter 2: System Configuration
2-24 9A656-04/9A686-04 Configuration Guide
2.14 THE MODULE SPECIFIC CONFIGURATION SCREEN
The Module Specific Configuration screen contains three menu items. These menu items open
screens that are used for advanced configuration of the 9A686-04, to configure the
management LAN Emulation Client, to view current port status information, and any port
errors that may have occurred.
Access the Module Specific Configuration Menu screen from the Module Configuration Menu
screen by using the arrow keys to highlight the MODULE SPECIFIC CONFIGURATION
field and pressing ENTER. The Configuration Menu screen,
Figure 2-12 , displays.
Figure 2-12 The Configuration Menu Screen
The following explains each field of the Configuration Menu screen.
SYSTEM CONFIGURATION
The System Configuration menu item opens the System Configuration Menu screen. This
screen provides access to additional screens that are used to configure the Private
Network-Network Interface (PNNI) feature of the SmartSwitch 9500, the Intergrated Local
Management Interface (ILMI), and to enable/disable ATM diagnostics that are performed
when power to the SmartSwitch 9500 is cycled. Since the SmartSwitch 9500 utilizes the
Enterasys Systems Distributed Management Framework (DMF), system level configuration
may be performed via any 9A686-04 installed in the chassis. Any system level configurations
that are performed will automatically be distributed to all other 9A686-04s installed in the
chassis. It is not necessary to repeat these configurations on any other module. It is
recommended (but not required) that the modifications to any system level settings be
performed on the 9A686-04 that has been elected the chassis agent. The chassis agent module
may be identified via the Module Selection screen (
Section 2.10 ). For details on the System
Configuration Menu screen, refer to Section 2.15 .