Cabletron Systems 9A656-04, Configuration Manual

Page: 112 / 172

Chapter 2: System Configuration
2-82 9A656-04/9A686-04 Configuration Guide
After these steps have been completed for the first interface, the same configuration must be
performed for the second interface. In this case, the SNMP command line would be:
snmpset -h 134.141.87.75 1.3.6.1.2.1.37.1.7.1.13.70102.2.50 Integer 5
2.31.4 Setting the Traffic Descriptor for the Receive Side
of the Interfaces
This section provides instructions on setting the traffic descriptors for the receive side of both
interfaces. Refer to
Figure 2-35 .
Figure 2-35 Setting the Traffic Descriptor (Receive Side)
A
Displays the name of the MIB command used to perform this procedure
(atmVclReceiveTrafficDescrIndex) and the OID string the SNMP application is using to
access this information (1.3.6.1.2.1.37.1.7.1.6).
B
Displays the instance that has been entered for this PVC (70101.2.50) This indicates that the
interface selected is 70101, and it has been assigned a VPI/VCI pair of 2.50. This also displays
the traffic descriptor value that has been assigned (10).
A
B
C