manualshive.com logo in svg

Brocade Communications Systems X6-4, Hardware Installation Manual, Page: 179 / 249

Share
Download
Brocade Communications Systems X6-4 Hardware Installation Manual Download Page 179

Power Supply Assemblies

•

AC power supply overview......................................................................................................................................................................... 179

•

HVAC/HVDC power supply overview...................................................................................................................................................180

•

Power supply assembly numbering....................................................................................................................................................... 182

•

Fan and power supply airflow....................................................................................................................................................................182

•

Precautions specific to power supply assembly................................................................................................................................184

•

Power supply assembly fault indicators................................................................................................................................................184

•

Power supply assembly task guide.........................................................................................................................................................184

•

Time and items required..............................................................................................................................................................................186

•

Removing a power supply.......................................................................................................................................................................... 186

•

Installing a power supply............................................................................................................................................................................. 187

•

Verifying power supply operation............................................................................................................................................................ 188

AC power supply overview

This device supports the following AC power supply assemblies. All power supplies installed in the device must be of the same type and
match the airflow of installed fan assemblies.

•

Power supply model supporting nonport-side air intake (NPI) provides 1450 W (100-120 VAC) and 2870 W (200-240
VAC). This assembly has two fans that move the air from the nonport side to the port side of the device.

•

Power supply model supporting nonport-side air exhaust (NPE) provides 1450 W (100-120 VAC) and 2870 W (200-240
VAC). This assembly has two fans that move the air from the port side to the nonport side of the device.

The following figure illustrates power supply assembly components.

FIGURE 63 

AC power supply assembly

1.

Fan 1

2.

Fan 2

3.

Handle

4.

Status LED

5.

AC power cable receptacle

6.

Airflow label

7.

Captive screw

Brocade X6-4 Director Hardware Installation Guide

53-1004106-07

179

Summary of Contents for X6-4


























































































































































































































































Reviews:

No comments