7
EN
Transmission signal
The heart rate chest belt and watch have a maximum transmission range of
about 62.5 centimetres (25 inches).
Flashes, when the watch is receiving
a signal from the chest belt. The signal is weak – the watch heart rate monitor
will only show “0”:
• Shorten the distance between the heart rate chest belt and watch.
• Re-adjust the position of the heart rate chest belt.
• Check the conductive pads are moist enough to ensure solid contact.
• Check the batteries. If they are low or exhausted, the range may be less.
If the watch is kept idle without receiving a heart rate signal for 5 minutes,
the heart rate receiver will turn off.
SWITCHING BETWEEN MAIN MODES
There are 6 main modes. Each main mode displays a banner screen telling you,
which mode you are entering. After 1 second the banner screen is automatically
replaced by the main mode screen. Press
MODE
to switch between the main
modes:
Mode
Banner
Main Mode
Clock
Stopwatch
User Profile
