Black Box LPB2910A, User Manual

Page: 54 / 367

Publication date: Sept, 2015
Revision A1
42
Disabled : Disable SNMP trap mode operation.

Trap Destination Configurations
Configure trap destinations on this page.

Name
Indicates the trap Configuration's name. Indicates the trap destination's name.

Enable
Indicates the trap destination mode operation. Possible modes are:
Enabled: Enable SNMP trap mode operation.
Disabled: Disable SNMP trap mode operation.

Version
Indicates the SNMP trap supported version. Possible versions are:
SNMPv1: Set SNMP trap supported version 1.
SNMPv2c: Set SNMP trap supported version 2c.
SNMPv3: Set SNMP trap supported version 3.

Trap Community
Indicates the community access string when sending SNMP trap packet. The allowed string length is 0
to 255, and the allowed content is ASCII characters from 33 to 126.
 Destination Address
Indicates the SNMP trap destination address. It allow a valid IP address in dotted decimal notation
('x.y.z.w').
And it also allow a valid hostname. A valid hostname is a string drawn from the alphabet (A-­‐Za-­‐z),
digits (0-­‐9), dot (.), dash (-­‐). Spaces are not allowed, the first character must be an alpha character,
and the first and last characters must not be a dot or a dash.
Indicates the SNMP trap destination IPv6 address. IPv6 address is in 128-­‐bit records represented as
eight fields of up to four hexadecimal digits with a colon separating each field (:). For example,
'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special syntax that can be used as a shorthand way of
representing multiple 16-­‐bit groups of contiguous zeros; but it can appear only once. It can also
represent a legally valid IPv4 address. For example, '::192.1.2.34'.

Destination port
Indicates the SNMP trap destination port. SNMP Agent will send SNMP message via this port, the port
range is 1~65535.
 Trap Inform Mode
Indicates the SNMP trap inform mode operation. Possible modes are:
Enabled: Enable SNMP trap inform mode operation.
Disabled: Disable SNMP trap inform mode operation.

Trap Inform Timeout (seconds)
Indicates the SNMP trap inform timeout. The allowed range is 0 to 2147.

Trap Inform Retry Times
Indicates the SNMP trap inform retry times. The allowed range is 0 to 255.

Trap Probe Security Engine ID
Indicates the SNMP trap probe security engine ID mode of operation. Possible values are:
Enabled: Enable SNMP trap probe security engine ID mode of operation.
Disabled: Disable SNMP trap probe security engine ID mode of operation.

Trap Security Engine ID
Indicates the SNMP trap security engine ID. SNMPv3 sends traps and informs using USM for
authentication and privacy. A unique engine ID for these traps and informs is needed. When "Trap
Probe Security Engine ID" is enabled, the ID will be probed automatically. Otherwise, the ID specified