Black Box LPB2910A, User Manual

Page: 284 / 367

Publication date: Sept, 2015
Revision A1
272
3-­‐9.2 MVR Channels Groups
The section describes how to display MVR Groups detailed information on the switch. Entries in the
MVR Group Table are shown on this page. The MVR Group Table is sorted first by VLAN ID, and then
by group.
Web Interface
To display the MVR Groups Information in the web interface:
1. Click Monitor, MVR, Groups Information.
2. To auto-­‐refresh the information, then you need to select “Auto-­‐refresh”.
3. Click “ Refresh“ to refresh an entry of the MVR Groups Information.
4. Click “<< or >> “ to move to the previous or next entry.
Figure 3-­‐9.2: The MVR Groups Information
Parameter description:
Navigating the MVR Channels (Groups) Information Table
Each page shows up to 99 entries from the MVR Group table, default is 20, selected through the
"entries per page" input field. When first visited, the web page will show the first 20 entries from the
beginning of the MVR Channels (Groups) Information Table.
The "Start from VLAN", and "Group Address" input fields allow the user to select the starting point in
the MVR Channels (Groups) Information Table. Clicking the button will update the displayed table
starting from that or the closest next MVR Channels (Groups) Information Table match. In addition,
the two input fields will—upon a button click—assume the value of the first displayed entry, allowing
for continuous refresh with the same start address.
The switch will use the last entry of the currently displayed table as a basis for the next lookup. When
the end is reached, the text "No more entries" is shown in the displayed table. Use the button to start
over.
MVR Channels (Groups) Information Table Columns
 VLAN ID:
VLAN ID of the group.

Groups:
Group ID of the group displayed.

Port Members:
Ports under this group.
 Buttons