manualshive.com logo in svg

Black Box LPB2910A, User Manual

The Black Box LPB2910A is a high-quality product designed for seamless connectivity solutions. To ensure a hassle-free installation and quick setup, we provide a comprehensive "Installation And Getting Started Manual" that you can easily download for free from manualshive.com. This manual will guide you through every step, making your experience smooth and efficient.

Share
Download
background image

  Publication  date:  Sept,  2015 

    Revision  A1

 

19 

 

Configured   Link   Speed:   

Selects   any   available   link   speed   for   the   given   switch   port.   Only   speeds   supported   by   the   specific   
port   are   shown.   Possible   speeds   are:       

Disabled   -­‐   Disables   the   switch   port   operation.       

Auto    -­‐    Port    auto    negotiating    speed    with    the    link    partner    and    selects    the    highest    speed    that    is   
compatible   with   the   link   partner.       

10Mbps   HDX   -­‐   Forces   the   copper   port   in   10-­‐Mbps   half-­‐duplex   mode.       

10Mbps   FDX   -­‐   Forces   the   copper   port   in   10-­‐Mbps   full-­‐duplex   mode.       
100Mbps   HDX   -­‐   Forces   the   copper   port   in   100-­‐Mbps   half-­‐duplex   mode.       

100Mbps   FDX   -­‐   Forces   the   copper   port   in   100-­‐Mbps   full-­‐duplex   mode.       

1Gbps   FDX   -­‐   Forces   the   port   in   1-­‐Gbps   full-­‐duplex   mode.       

2.5   Gbps   FDX   -­‐   Forces   the   Serdes   port   in   2.5-­‐Gbps   full-­‐duplex   mode.       

SFP_Auto_AMS   -­‐   Automatically   determines   the   speed   of   the   SFP.   NOTE:   There   is   no   standard   way   
to   do   SFP   auto   detect,   so   here   it   is   done   by   reading   the   SFP   ROM.   Because   there   is   no   standard   way   
to   auto-­‐detect   SFPs,   some   SFPs   might   not   be   detectable.   The   port   is   set   in   AMS   mode.   The   copper   

port   is   set   in   Auto   mode.       

100-­‐FX   -­‐   SFP   port   in   100-­‐FX   speed.   The   copper   port   is   disabled.       

100-­‐FX_AMS   -­‐   Port   in   AMS   mode.   SFP   port   in   100-­‐FX   speed.   The   copper   port   is   in   Auto   mode.       

1000-­‐X   -­‐   SFP   port   in   1000-­‐X   speed.   The   copper   port   is   disabled.       

1000-­‐X_AMS   -­‐   Port   in   AMS   mode.   SFP   port   in   1000-­‐X   speed.   The   copper   port   is   in   Auto   mode.   Ports   
in   AMS   mode   with   1000-­‐X   speed   prefer   the   copper   port.   Ports   in   AMS   mode   with   100-­‐FX   speed   
prefer   the   fiber   port.           

 

Flow   Control:   

When    Auto    Speed    is    selected    on    a    port,    this    section    indicates    the    flow    control    capability    that    is   
advertised    to    the    link    partner.    When    a    fixed-­‐speed    setting    is    selected,    that    is    what    is    used.    The   
Current    Rx    column    indicates    whether    pause    frames    on    the    port    are    obeyed,    and    the    Current    Tx   
column   indicates   whether   pause   frames   on   the   port   are   transmitted.   The   Rx   and   Tx   settings   are   
determined   by   the   result   of   the   last   Auto-­‐Negotiation.   

Check    the    configured    column    to    use    flow    control.    This    setting    is    related    to    the    setting    for   
Configured   Link   Speed.       

 

Maximum   Frame   Size:   

Enter   the   maximum   frame   size   allowed   for   the   switch   port,   including   FCS.       

 

Excessive   Collision   Mode:   

Configure   port   transmit   collision   behavior.       

Discard:

   Discard   frame   after   16   collisions   (default).       

Restart:   

Restart   back-­‐off   algorithm   after   16   collisions.       

 

Buttons   

Apply

   –   Click   to   save   changes.   

    Reset

-­‐   Click   to   undo   any   changes   made   locally   and   revert   to   previously   saved   values.

   

 

Upper   right   icon   (Refresh)       

Click   to   refresh   the   Port   link   Status   manually.   

Summary of Contents for LPB2910A
















































































































































































































































































































































































Reviews:

No comments

Related manuals for LPB2910A

ABB NAL Series Mounting And Operation Manual preview
NAL Series
Brand: ABB Pages: 32
ABB VUBB User Manual preview
VUBB
Brand: ABB Pages: 44
ABB Sense7 Series Original Instructions Manual preview
Sense7 Series
Brand: ABB Pages: 15
Painless Performance Products 50201 Installation Instructions preview
50201
Brand: Painless Performance Products Pages: 2
3Com 4210 Series Datasheet preview
4210 Series
Brand: 3Com Pages: 8
3Com PathBuilder S200 Series Feature Manual preview
PathBuilder S200 Series
Brand: 3Com Pages: 11
3Com 4400 Datasheet preview
4400
Brand: 3Com Pages: 8
3Com CoreBuilder 3500 Getting Started Manual preview
CoreBuilder 3500
Brand: 3Com Pages: 96
3One data IPS7110-2GC-8POE Quick Installation Manual preview
IPS7110-2GC-8POE
Brand: 3One data Pages: 3
Datavideo SE-1000 Reference Manual preview
SE-1000
Brand: Datavideo Pages: 4
Datavideo SE-1200MU Quick Start Manual preview
SE-1200MU
Brand: Datavideo Pages: 66
WAGO 852-111 Mounting, Installation And Handling preview
852-111
Brand: WAGO Pages: 39
PRO SIGNAL PSG3450 Manual preview
PSG3450
Brand: PRO SIGNAL Pages: 5
Xunison Hub M50 Mesh Cube Quick Start Manual preview
Hub M50 Mesh Cube
Brand: Xunison Pages: 11
Black Box SW1046A Manual preview
SW1046A
Brand: Black Box Pages: 28
Technische Alternative AI5S-DL Operator'S And Programming Manual preview
AI5S-DL
Brand: Technische Alternative Pages: 4
DeLOCK 87699 User Manual preview
87699
Brand: DeLOCK Pages: 8
Lindy 32 277 Installation And Use Manual preview
32 277
Brand: Lindy Pages: 38

Brands by name

Popular brands

Load more brands