Publication date: Sept, 2015
Revision A1
159
2-‐17.2.2 Group to VLAN
This section allows you to map an already configured Group Name to a VLAN for the selected stack
switch unit switch.
Web Interface
To Display the Group Name of VLAN mapping table configured in the web interface:
1. Click Group Name VLAN configuration and add new entry.
2. Specify the Group Name and VLAN ID.
3. Click Apply.
Figure 2-‐17.2.2: The Group Name of VLAN Mapping Table
Parameter description:
Delete:
To delete a Group Name to VLAN map entry, check this box. The entry will be deleted on the
switch during the next Save.
Group Name:
A valid Group Name is a string of, at most, 16 characters that consists of a combination of
alphabetic characterss (a-‐z or A-‐Z) and integers (0-‐9), and no special character is allowed. The
Group name you try to map to a VLAN must be present in the Protocol to Group mapping table and
must not be already used by any other existing mapping entry on this page.
VLAN ID:
Indicates the ID to which the Group Name will be mapped. A valid VLAN ID ranges from 1–4095.
Port Members:
A row of check boxes for each port is displayed for each Group Name to VLAN ID mapping. To
include a port in a mapping, check the box. To remove or exclude the port from the mapping, make
sure the box is unchecked. By default, no ports are members, and all boxes are unchecked.
Adding a New Group to VLAN mapping entry:
Click to add a new entry in mapping table. An empty row is added to the table, and the Group
Name, VLAN ID and port members can be configured as needed. Legal values for a VLAN ID are 1
through 4095. The button can be used to undo the addition of new entry.
Buttons:
Apply
– Click to save changes.
Reset-‐
Click to undo any changes made locally and revert to previously saved values.
Auto-‐refresh:
Select the auto-‐refresh icon and the device will refresh the information automatically.
Upper right icon (Refresh):
Summary of Contents for LPB2910A
