Black Box LPB2910A, User Manual

Page: 43 / 367

Publication date: Sept, 2015
Revision A1
31
Type in the password. The allowed string length is 0 to 255, and the allowed content is the ASCII
characters from 32 to 126.

Password (again)
Type the password again. You must type the same password again in the field.
 Privilege Level:
The privilege level of the user. The allowed range is 1 to 15. If the privilege level value is 15, it can
access all groups, i.e., it is granted full control of the device. Other values need to refer to each
group privilege level. User’s privilege should be same or greater than the group privilege level to
access that group. By default setting, most groups privilege level 5 have read-­‐only access and
privilege level 10 has read-­‐write access. The system maintenance (software upload, factory
defaults, and etc.) need user privilege level 15. Generally, the privilege level 15 can be used for an
administrator account, privilege level 10 for a standard user account, and privilege level 5 for a
guest account.
 Buttons
Apply – Click to save changes.
Reset -­‐ Click to undo any changes made locally and revert to previously saved values.
Cancel -­‐ Click to undo any changes made locally and return to the Users.
Delete User -­‐ Delete the current user. This button is not available for new configurations (Add
new user).