Black Box LPB2910A, User Manual

Page: 185 / 367

Publication date: Sept, 2015
Revision A1
173

Queue Shaper Rate:
Controls the rate for the queue shaper. The default value is 1. This value is restricted to 1-­‐1000000
when the "Unit" is "kbps", and it is restricted to 1-­‐100000 when the "Unit" is “Mbps.”

Queue Shaper Unit:
Controls the unit of measure for the queue shaper rate as "kbps" or “Mbps.” The default value is
“kbps.”
 Queue Shaper Excess:
Controls whether the queue is allowed to use excess bandwidth.
 Queue Scheduler Weight:
Controls the weight for this queue. The default value is “17.” This value is restricted to 1–100. This
parameter is only shown if "Scheduler Mode" is set to “Weighted.”

Queue Scheduler Percent:
Shows the weight in percent for this queue. This parameter is only shown if "Scheduler Mode" is
set to "Weighted."

Port Shaper Enable:
Controls whether the port shaper is enabled for this switch port.

Port Shaper Rate:
Controls the rate for the port shaper. The default value is 1. This value is restricted to 1–1000000
when the “Unit” is “kbps,” and it is restricted to 1-­‐100000 when the "Unit" is “Mbps.”

Port Shaper Unit:
Controls the unit of measure for the port shaper rate as "kbps" or “Mbps.” The default value is
“kbps.”
 Buttons:
Apply — Click to save changes.
Reset — Click to undo any changes made locally and revert to previously saved values.