manualshive.com logo in svg

Black Box LPB2910A, User Manual

The Black Box LPB2910A is a high-quality product designed for seamless connectivity solutions. To ensure a hassle-free installation and quick setup, we provide a comprehensive "Installation And Getting Started Manual" that you can easily download for free from manualshive.com. This manual will guide you through every step, making your experience smooth and efficient.

Share
Download
background image

  Publication  date:  Sept,  2015 

    Revision  A1

 

291 

Endpoints   (Class   I),   and   any   LLDP-­‐MED   Endpoint   Device   claiming   compliance   as   a   Communication   

Device   (Class   III)   will   also   support   all   aspects   of   TIA-­‐1057   applicable   to   both   Media   Endpoints   (Class   
II)   and   Generic   Endpoints   (Class   I).   

 

LLDP-­‐MED   Generic   Endpoint   (Class   I):   

The    LLDP-­‐MED    Generic    Endpoint    (Class    I)    definition    is    applicable    to    all    endpoint    products    that   
require   the   base   LLDP   discovery   services   defined   in   TIA-­‐1057,   but   do   not   support   IP   media   or   act   as   
an    end-­‐user    communication    appliance.    Such    devices    may    include    (but    are    not    limited    to)    IP   
Communication    Controllers,    other    communication    related    servers,    or    any    device    requiring    basic   

services   as   defined   in   TIA-­‐1057.   

Discovery   services   defined   in   this   class   include   LAN   configuration,   device   location,   network   policy,   
power   management,   and   inventory   management.   

 

LLDP-­‐MED   Media   Endpoint   (Class   II):   

The   LLDP-­‐MED   Media   Endpoint   (Class   II)   definition   is   applicable   to   all   endpoint   products   that   have   
IP    media    capabilities    but    may    or    may    not    be    associated    with    a    particular    end    user.    Capabilities   
include    all    of    the    capabilities    defined    for    the    previous    Generic    Endpoint    Class    (Class    I),    and    are   

extended   to   include   aspects   related   to   media   streaming.   Example   product   categories   expected   to   
adhere   to   this   class   include   (but   are   not   limited   to)   Voice   /   Media   Gateways,   Conference   Bridges,   
Media   Servers,   and   similar.   

Discovery   services   defined   in   this   class   include   media-­‐type-­‐specific   network   layer   policy   discovery.   

 

LLDP-­‐MED   Communication   Endpoint   (Class   III)   :   

The   LLDP-­‐MED   Communication   Endpoint   (Class   III)   definition   is   applicable   to   all   endpoint   products   
that   act   as   end   user   communication   appliances   supporting   IP   media.   Capabilities   include   all   of   the   
capabilities   defined   for   the   previous   Generic   Endpoint   (Class   I)   and   Media   Endpoint   (Class   II)   classes,   

and    are    extended    to    include    aspects    related    to    end    user    devices.    Example    product    categories   
expected    to    adhere    to    this    class    include    (but    are    not    limited    to)    end    user    communication   
appliances,    such    as    IP    Phones,    PC-­‐based    softphones,    or    other    communication    appliances    that   
directly   support   the   end   user.   

Discovery   services   defined   in   this   class   include   provision   of   location   identifier   (including   ECS   /   E911   
information),   embedded   L2   switch   support,   and   inventory   management.   

 

LLDP-­‐MED   Capabilities:   

LLDP-­‐MED    Capabilities    describes    the    neighborhood    unit's    LLDP-­‐MED    capabilities.    The    possible   
capabilities   are:   

1.   LLDP-­‐MED   capabilities   

2.   Network   Policy   

3.   Location   Identification   

4.   Extended   Power   via   MDI   -­‐   PSE   

5.   Extended   Power   via   MDI   -­‐   PD   
6.   Inventory   

7.   Reserved   

 

Application   Type:   

Application    Type    indicating    the    primary    function    of    the    application(s)    defined    for    this    network   
policy,   advertised   by   an   Endpoint   or   Network   Connectivity   Device.   The   possible   application   types   
are   shown   below.   

1.    Voice    -­‐    for    use    by    dedicated    IP    Telephony    handsets    and    other    similar    appliances    supporting   

interactive    voice    services.    These    devices    are    typically    deployed    on    a    separate    VLAN    for    ease    of   
deployment   and   enhanced   security   by   isolation   from   data   applications.   

2.    Voice    Signalling    -­‐    for    use    in    network    topologies    that    require    a    different    policy    for    the    voice   
signalling   than   for   the   voice   media.   

3.   Guest   Voice   -­‐   to   support   a   separate   limited   feature-­‐set   voice   service   for   guest   users   and   visitors   

Summary of Contents for LPB2910A
















































































































































































































































































































































































Reviews:

No comments

Related manuals for LPB2910A

3One data IPS7110-2GC-8POE Quick Installation Manual preview
IPS7110-2GC-8POE
Brand: 3One data Pages: 3
Kramer XL 1208V2 Specifications preview
XL 1208V2
Brand: Kramer Pages: 2
Enterasys RoamAbout RBT-4102-BG Installation Manual preview
RoamAbout RBT-4102-BG
Brand: Enterasys Pages: 72
Dahua PFS3005-5ET-V2 Quick Start Manual preview
PFS3005-5ET-V2
Brand: Dahua Pages: 17
Cabletron Systems FlowPoint 2100 12 User Manual preview
FlowPoint 2100 12
Brand: Cabletron Systems Pages: 36
Hawking PN824ES Specifications preview
PN824ES
Brand: Hawking Pages: 2
ALFAtron ALF-WP70T/RS User Manual preview
ALF-WP70T/RS
Brand: ALFAtron Pages: 15
AETEK C11-082-32-120 Quick Installation Manual preview
C11-082-32-120
Brand: AETEK Pages: 2
SignaMax 065-7331GPOEP User Manual preview
065-7331GPOEP
Brand: SignaMax Pages: 6
Network Technologies SE-DVI-2 Installation And Operation Manual preview
SE-DVI-2
Brand: Network Technologies Pages: 7
KYLAND Technology SICOM3028GP Series Hardware Installation Manual preview
SICOM3028GP Series
Brand: KYLAND Technology Pages: 40
JetNet 5018G Series Quick Installation Manual preview
5018G Series
Brand: JetNet Pages: 20
SLV 470819 Quick Installation Manual preview
470819
Brand: SLV Pages: 22
HighSecLabs K304 Quick Start Manual preview
K304
Brand: HighSecLabs Pages: 2
TLS Electronics 875300 User Manual preview
875300
Brand: TLS Electronics Pages: 12
Videosec RF-ZE901-220 Installation Manual preview
RF-ZE901-220
Brand: Videosec Pages: 3
Lantech IGS-3208MGSFP User Manual preview
IGS-3208MGSFP
Brand: Lantech Pages: 27
Eaton XTCE095F F47 Series Instruction Leaflet preview
XTCE095F F47 Series
Brand: Eaton Pages: 2

Brands by name

Popular brands

Load more brands