Black Box LPB2910A, User Manual

Page: 111 / 367

Publication date: Sept, 2015
Revision A1
99
Parameter description:

Enable Loop Protection:
Controls whether loop protections is enabled (as a whole).
 Transmission Time:
The interval between each loop protection PDU sent on each port. Valid values are 1 to 10
seconds.

Shutdown Time:
The period (in seconds) for which a port will be kept disabled in the event of a loop is detected
(and the port action shuts down the port). Valid values are 0 to 604800 seconds (7 days). A value of
zero will keep a port disabled (until next device restart).

Port No:
The switch port number of the port.
 Enable:
Controls whether loop protection is enabled on this switch port.

Action:
Configures the action performed when a loop is detected on a port. Valid values are Shutdown Port,
Shutdown Port and Log or Log Only.

Tx Mode:
Controls whether the port is actively generating loop protection PDUs, or whether it is just passively looking
for looped PDUs.

Buttons:
Apply – Click to save changes.
Reset-­‐ Click to undo any changes made locally and revert to previously saved values.