Black Box LPB2910A, User Manual

Page: 49 / 367

Publication date: Sept, 2015
Revision A1
37
2-­‐5.1.6 Access Management
This section explains how to configure an access management table of the Switch, including
HTTP/HTTPS, SNMP, and TELNET/SSH. You can manage the Switch over an Ethernet LAN, or over the
Internet.
Web Interface
To configure an Access Management Configuration in the web interface:
1. Select “Enabled” in the
Access Management
Configuration mode.
2. Click “Add new entry.”
3. Specify the Start IP Address, and the End IP Address.
4. Check Access Managemnet method (HTTP/HTTPS, SNMP, and TELNET/SSH) in the entry.
5. Click Apply.
Figure 2-­‐5.1.6: The Access Management Configuration
Parameter description:

Mode:
Indicates the access management mode operation. Possible modes are:
Enabled: Enable access management mode operation.
Disabled: Disable access management mode operation.

VLAN ID:
Indicates the VLAN ID for the access management entry.

Delete:
Check to delete the entry. It will be deleted during the next save.
 Start IP address:
Indicates the start IP address for the access management entry.

End IP address:
Indicates the end IP address for the access management entry.

HTTP/HTTPS:
Indicates that the host can access the switch from HTTP/HTTPS interface if the host IP address
matches the IP address range provided in the entry.
 SNMP: