manualshive.com logo in svg

Black Box LPB2910A, User Manual

The Black Box LPB2910A is a high-quality product designed for seamless connectivity solutions. To ensure a hassle-free installation and quick setup, we provide a comprehensive "Installation And Getting Started Manual" that you can easily download for free from manualshive.com. This manual will guide you through every step, making your experience smooth and efficient.

Share
Download
background image

  Publication  date:  Sept,  2015 

    Revision  A1

 

292 

with    their    own    IP    Telephony    handsets    and    other    similar    appliances    supporting    interactive    voice   

services.   

4.   Guest   Voice   Signaling   -­‐   for   use   in   network   topologies   that   require   a   different   policy   for   the   guest   
voice   signaling   than   for   the   guest   voice   media.   

5.   Softphone   Voice   -­‐   for   use   by   softphone   applications   on   typical   data   centric   devices,   such   as   PCs   
or   laptops.   

6.    Video    Conferencing    -­‐    for    use    by    dedicated    Video    Conferencing    equipment    and    other    similar   
appliances   supporting   real-­‐time   interactive   video/audio   services.   
7.   Streaming   Video   -­‐   for   use   by   broadcast   or   multicast   based   video   content   distribution   and   other   
similar    applications    supporting    streaming    video    services    that    require    specific    network    policy   
treatment.   Video   applications   relying   on   TCP   with   buffering   would   not   be   an   intended   use   of   this   
application   type.   

8.    Video    Signaling    -­‐    for    use    in    network    topologies    that    require    a    separate    policy    for    the    video   
signaling   than   for   the   video   media.   

 

Policy:   

Policy   indicates   that   an   Endpoint   Device   wants   to   explicitly   advertise   that   the   policy   is   required   by   
the   device.   Can   be   either   Defined   or   Unknown.       

Unknown:   The   network   policy   for   the   specified   application   type   is   currently   unknown.   

Defined:   The   network   policy   is   defined.   

 

TAG:   

TAG   is   indicative   of   whether   the   specified   application   type   is   using   a   tagged   or   an   untagged   VLAN.   
Can   be   Tagged   or   Untagged.   

Untagged:   The   device   is   using   an   untagged   frame   format   and   as   such   does   not   include   a   tag   header   

as   defined   by   IEEE   802.1Q-­‐2003.   

Tagged:   The   device   is   using   the   IEEE   802.1Q   tagged   frame   format.   

 

VLAN   ID:   

VLAN    ID    is    the    VLAN    identifier    (VID)    for    the    port    as    defined    in    IEEE    802.1Q-­‐2003.    A    value    of    1   
through   4094   is   used   to   define   a   valid   VLAN   ID.   A   value   of   0   (Priority   Tagged)   is   used   if   the   device   is   
using   priority   tagged   frames   as   defined   by   IEEE   802.1Q-­‐2003,   meaning   that   only   the   IEEE   802.1D   
priority   level   is   significant   and   the   default   PVID   of   the   ingress   port   is   used   instead.   

 

Priority:   

Priority   is   the   Layer   2   priority   to   be   used   for   the   specified   application   type.   It   is   one   of   the   eight   
priority   levels   (0   through   7).   

 

DSCP:   

DSCP   is   the   DSCP   value   to   be   used   to   provide   Diffserv   node   behavior   for   the   specified   application   
type   as   defined   in   IETF   RFC   2474.   Contains   one   of   64   code   point   values   (0   through   63).   

 

Auto-­‐negotiation   

Auto-­‐negotiation

   identifies   if   MAC/PHY   auto-­‐negotiation   is   supported   by   the   link   partner.   

 

Auto-­‐negotiation   status   

Auto-­‐negotiation    status

    identifies    if    auto-­‐negotiation    is    currently    enabled    at    the    link    partner.    If   

Auto-­‐negotiation

   is   supported   and   

Auto-­‐negotiation    status

   is   disabled,   the   802.3   PMD   operating   

mode   will   be   determined   the   operational   MAU   type   field   value   rather   than   by   auto-­‐negotiation.   

 

Auto-­‐negotiation   Capabilities   

Auto-­‐negotiation   Capabilities

   shows   the   link   partners   MAC/PHY   capabilities.

   

 

Buttons   

   

Summary of Contents for LPB2910A
















































































































































































































































































































































































Reviews:

No comments

Related manuals for LPB2910A

Barksdale 8000 Series Operating Instructions Manual preview
8000 Series
Brand: Barksdale Pages: 6
D-Link TM DES-6500 Command Line Interface Reference Manual preview
TM DES-6500
Brand: D-Link Pages: 267
H3C S3100 Series Command Manual preview
S3100 Series
Brand: H3C Pages: 1089
Painless Performance Products 50201 Installation Instructions preview
50201
Brand: Painless Performance Products Pages: 2
TRENDnet TE100-S5 Lühike Paigaldusjuhend preview
TE100-S5
Brand: TRENDnet Pages: 11
Larson Electronics EXHL-TRN-LE1 Series Manual preview
EXHL-TRN-LE1 Series
Brand: Larson Electronics Pages: 2
Transition Networks SISTG1040-242-LRT Install Manuals preview
SISTG1040-242-LRT
Brand: Transition Networks Pages: 31
Eaton HOMECT Installation And Setup Manual preview
HOMECT
Brand: Eaton Pages: 5
Extron electronics 60-1021-01 User Manual preview
60-1021-01
Brand: Extron electronics Pages: 137
Kramer Sierra Pro XL 1608V5S Specifications preview
Sierra Pro XL 1608V5S
Brand: Kramer Pages: 2
OTS IES8242MPp9H-S-DR Quick Installation Manual preview
IES8242MPp9H-S-DR
Brand: OTS Pages: 3
Gembird UHB-C224 User Manual preview
UHB-C224
Brand: Gembird Pages: 11
3One data IES205 Hardware Installation Manual preview
IES205
Brand: 3One data Pages: 9
Black Box KVS4-1002HV User Manual preview
KVS4-1002HV
Brand: Black Box Pages: 15
EMP-Centauri T1/1+1ENP8dB-1 Instruction Manual preview
T1/1+1ENP8dB-1
Brand: EMP-Centauri Pages: 4
Opencockpits BREAKERF Installation & User Manual preview
BREAKERF
Brand: Opencockpits Pages: 30
Hamlet HUSB420 User Manual preview
HUSB420
Brand: Hamlet Pages: 2
Videoswitch VS - 12 User Manual preview
VS - 12
Brand: Videoswitch Pages: 17

Brands by name

Popular brands

Load more brands